Menu

Graduate Aptitude Test in Engineering (GATE)

What is GATE EXAM?

The Graduate Aptitude Test in Engineering, or GATE exam, is not just an exam but a golden opportunity for engineering aspirants who dream big. So, dear candidates, if you want to get admission to M.Tech, ME, or direct PhD programs in top institutes like IIT, NIT, IIIT, or want to make a career in leading Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, DRDO, or ISRO, then the GATE 2027 exam can be the launchpad for you.

The GATE exam is a nationwide test conducted in eight zones across the country. It is organized by a special committee consisting of top faculty members from IISc Bangalore and seven IITs, under the guidance of the National Coordination Board (NCB), which is part of the Ministry of Education, Government of India.

 

GATE 2026 result has been declared. A Post-GATE 2026 Counselling Session is being organised to provide guidance on the next steps, opportunities, and informed career decisions after GATE. Candidates are requested to share their GATE 2026 result and register for the Post-GATE Counselling Session to get structured academic and career guidance.

Post GATE Counselling Session

GATE EXAM 2027 : What’s New?

  • Two new subjects –There are now two new subjects: Geomatics Engineering (GE) and Naval Architecture and Marine Engineering (NM). Thus, the total number of subjects has increased to 30.
  • In another newly introduced change, students applying for the GATE Exam 2027 can also opt for two different papers from the prescribed set of combinations.
  • The eligibility criteria to appear for GATE-2027 have been relaxed from a minimum 10+2+4 (ongoing) to a minimum 10+2+3 (ongoing), enabling even those in the third year of their undergraduate studies to appear for the examination. Thus, candidates have an additional opportunity to improve their performance and secure better career options.
  • All test papers of the GATE Exam 2027 will be entirely objective type. The pattern of questions may include (i) Multiple Choice Questions (MCQ), (ii) Multiple Select Questions (MSQ), and/or (iii) Numerical Answer Type (NAT) questions.

Combination of Two Papers Allowed

(Subject to availability of infrastructure and schedule)

Code of The First (Primary) Paper Codes of Papers Allowed as The Second Paper
AE CE, ME, XE
AG CE
AR CE, GE
BM BT, IN
BT BM, XL
CE AE, AG, AR, ES, GE, NM, XE
CH ES, PE , XE
CS DA, EC, GE, MA, PH, ST
CY XE, XL
EC CS, DA, IN, PH, EE
EE DA, EC, IN, PH
ES CE, CH, GE
EY XL
GE AR, CE, GG, ES, CS
GG GE
IN BM, EC, EE, ME
MA CS, DA, PH, ST
ME AE, DA, IN, NM, PI, XE
MN -
MT XE
NM CE, ME
PE CH
PH CS, DA, EC, EE, MA, XE
PI ME, XE
RA EE, ME, DA, CS
ST CS, DA, MA, XH
DA CS, EC, EE, MA, ME, PH, ST, XE
XE AE, CE, CH, CY, DA, ME, MT, PH. PI
XH ST
XL AE, CE, CH, CY, DA, ME, MT, PH. PI

GATE Exam Organizing Institutes

The GATE exam is organized annually by the top institutes in India, including IIT Bombay, IIT Delhi, IIT Guwahati, IIT Kanpur, IIT Kharagpur, IIT Madras, IIT Roorkee, and IISc Bangalore. These institutes take turns hosting the exam on a rotational basis. The table below shows which institute organized the exam in different years. IIT Guwahati is scheduled to host the GATE 2027 examination.

Here is the list of institutes that have conducted the GATE exam from 1995 to 2027:

Year Organizing Institute
2027 IIT Madras
2026 IIT Guwahati
2025 IIT Roorkee
2024 IISC Bengaluru
2023 IIT Kanpur
2022 IIT Kharagpur
2021 IIT Bombay
2020 IIT Delhi
2019 IIT Madras
2018 IIT Guwahati
2017 IIT Roorkee
2016 IISc Bangalore
2015 IIT Kanpur
2014 IIT Kharagpur
2013 IIT Bombay
2012 IIT Delhi
2011 IIT Madras
2010 IIT Guwahati
2009 IIT Roorkee
2008 IISc Bangalore
2007 IIT Kanpur
2006 IIT Kharagpur
2005 IIT Bombay
2004 IIT Delhi
2003 IIT Madras
2002 IISc Banglore
2001 IIT Kanpur
2000 IIT Kharagpur
1999 IIT Bombay
1998 IIT Delhi
1997 IIT Madras
1996 IISc Banglore
1995 IIT Kanpur

GATE Paper Codes

Moving on, let us see that, while filling out the GATE application form, candidates have to keep in mind the subject paper code. As per the GATE 2025 Information Brochure, candidates can choose a maximum of two subject papers from the list of 30 available options. It is recommended that candidates choose the papers related to their qualifying degree. However, candidates are free to choose any subject paper as per their future admission goals; just make sure to check the eligibility criteria of the institutes where you are planning to apply. The subject codes are mentioned below:

PAPER CODE
Aerospace Engineering AE
Agricultural Engineering AG
Architecture and Planning AR
Biotechnology BT
Bio - medical Engineering BM
Civil Engineering CE
Chemical Engineering CH
Computer Science & Information Technology CS
Chemistry CY
Data Science & Artificial Intelligence DA
Electronics and Communication Engineering EC
Electrical Engineering EE
Environmental Science and Engineering ES
Ecology and Evolution EY
Geomatics Engineering GE
Geology and Geophysics GG
Instrumentation Engineering IN
Mathematics MA
Mechanical Engineering ME
Mining Engineering MN
Metallurgical Engineering MT
Naval Architecture & Marine Engineering NM
Physics PH
Production and Industrial Engineering PI
Petroleum Engineering PE
Robotics & Automation RA
Statistics ST
Humanities and Social Sciences XH
Engineering Sciences XE
Life Sciences XL

With a successful attempt in GATE an aspirant can choose the most suitable option from wide range of roads to travel to his final career destination :

  • Students can pursue M.Tech/M.S/ M.E/Ph.D from IISc Bangalore, IITs, NITs, IIITs and other reputed institutes.
  • Students can pursue Post Graduate Diploma in Industrial Engineering (PGDIE), Post Graduate Diploma in Manufacturing Management (PGDMM), Post Graduate Diploma in Project Management (PGDPM) from NITIE Mumbai.
  • Several reputed Maharatna and Navratna PSUs and research organizations recruit on basis of GATE Score. i.e. IOCL, NTPC, BHEL, PGCIL, BARC, CSIR etc.
  • Teaching: Professor, Asst. Professor at IITs, NITs and other reputed educational institutes.
  • Junior Research Fellow: ISRO, DRDO, BARC, CSIR, IITs etc.
  • Senior Research Fellow: ISRO, DRDO, BARC, CSIR, IITs etc.
  • Junior/Senior Research Associates.
  • Scientists “C” grade jobs.
  • Lucrative opportunities in research & development after post-graduation.
  • Multinational firms shortlist candidates on the basis of GATE score.
  • Some international universities offers M.S or Ph.D programs on the basis of GATE Score.

GATE 2027 Exam Eligibility Criteria

Anyone who has successfully completed 10+2+2 or 10+3+1 and currently studying in 3rd or higher years of any undergraduate degree program OR has already graduated in any government approved degree program in Engineering / Technology / Architecture / Science / Commerce / Arts is eligible to apply for GATE.

 

Qualifying Degree Qualifying Degree/Examination Description of eligible candidates

BE/BTech/BPharm

Bachelor’s degree holders in Engineering/Technology (4 years after 10+2 or 3 years after B.Sc./Diploma in Engineering /Technology) Currently in the 3rd year or higher or already completed

B.Arch

Bachelor’s degree holders of Architecture (5 years course) Currently in the 3rd year or higher or already completed

B.Sc (Research)/BS

Bachelor’s degree in Science (Post-Diploma/4 years after 10+2)

Currently in the 3rd year or higher or already completed

MSc/MA/MCA or equivalent

Master’s degree in any branch of Science/Arts/Mathematics/Statistics/Computer Applications or equivalent

Currently in the first year or higher or already completed

Int ME/ M.Tech (Post-B.Sc)

Post-B.Sc Integrated Master’s degree programs in Engineering/Technology (4 year program)

Currently in the 1st/ 2nd/ 3rd/4th year or already completed

Int ME/ M.Tech or Dual Degree (after Diploma or 10+2)

Integrated Master’s degree program or Dual Degree program in Engineering/Technology (5 year program)

Currently in the 3rd/ 4th/5th year or already completed

Int M.Sc/ Int BS-MS

Integrated M.Sc. or 5 years integrated B.S.-M.S. program Currently in the 3rd year or higher or already completed

Professional Society Examinations (equivalent to BE/BTech/BArch)

B.E./B.Tech./B.Arch. equivalent examinations of Professional Societies, recognised by MoE/UPSC/AICTE (e.g., AMIE by Institution of Engineers-India, AMICE by the Institute of Civil Engineers-India and so on) Completed Section A or equivalent of such professional courses

GATE 2027 Exam Preparation Strategy

Big Journeys begin with Small Steps

"Success doesn’t necessarily come from breakthrough Innovation, but from flawless Execution."

Often I hear a concern among the students regarding “What should be our strategy to crack GATE exams? To answer this question in the most simplified way, this article is my sincere effort to strategise things for aspirants, which will be fruitful for young friends.

There are two categories of ESE/GATE Aspirants : (1) Freshers , preparing first time for the competitive exams (Neophytes) (2) Repeaters , who have already given one or more attempts (Rank Improvers)

(I) Strategy for Neophytes:

If you are a fresher and preparing first time then I would suggest you the following approach to be adopted-

  • Define your aim and target the desired exam right from the beginning. You should examine closely the examination pattern, syllabus and the level of difficulty.
  • The first step for amateurs should be, to go through previous years’ question papers of the aimed exam and identify what type of questions are asked, like whether it is theoretical (then what subjects/which topics are mostly asked) or derivations or numerical type.
  • Keep one best reference book for each subject. You are not advised to read too many books for each subject; practically it is not possible in limited time frame.

The STUDY REGIME:

Make an overall plan of your career; define immediate and ultimate goals of your career, then make a roadmap to execute in most effective manner. Being an engineer you should understand the importance of planning and execution of the plan.

Overall plan may be further divided in three stages:

1. Six month /One year plan:

Divide months for different subjects and plan it so as to complete the entire syllabus in the left over time. In the current scenario of high cut-offs, do not go for selective study; instead cover the entire syllabus, because you never know “the topic left could be the topic of conquest.”

2. Subject-wise Plan/ Bi-weekly plan:

For each subject, study should be exam oriented, i.e. you should get acclimatize with the subject , so that you may know which area is to be focussed like whether theory has to be focussed or numerical or solving previous years’ questions will suffice. Every subject requires different approach. For example in mathematics you may be required to focus on practicing problems where as in English altogether different approach, similarly in technical subjects the approach may differ from subject to subject.

If you are enrolled in any coaching institute, then concentrate and study well in coaching classroom, your class notes should be full and final and should be ready in classroom itself, with simultaneous marking of IMPORTANT concept /formulae and develop a habit of writing of NOTE points ,wherever required. If only self study is your style of preparing without coaching, then also notes making is advisable.

One point to be kept in mind is “Work for Yourself”; i.e. make notes for yourself, it should be self hand written notes, as this will develop your writing efficiency in terms of speed, accuracy hand writing and also helps in memory retention.

3. Daily To-Do list /Daily plan:

This is basically for effective time management. Plan and freeze the study hours and abstain from using mobile phones, social media, what's app etc during these hours. 10 to 15 minutes are sufficient to plan next day schedule, it will help in removing redundant activities of your schedule and you can make best use of your time for study. I would also suggest you to pre plan your area /subject /topic of your study for the next day, it would help in activating senses of your mind to stimulate for study which helps in better memory retention.

Solving previous years’ questions of GATE (at least of last 10-15 years) should be made contemporaneous with class notes. Do not postpone it for later, topic that is covered in class or studied on your own, finish the previous years' questions on priority basis.

While solving questions, mark the questions which you were not able to solve. Refer the reference book for the clarity of concepts, and solve again. In front of the question write the Page Number and Name of the book referred and in the book referred underline or highlight the concept. This above methodology is to be followed for all workbook and other materials also. After a few months while doing revision you should re-attempt these marked questions only and no need to solve other questions.

Make a REVISION plan:

Make a habit of reading and revising simultaneously.

While studying a particular subject; devote 70-80% of self study time in developing concepts of new subject and rest 20-30% time should be religiously devoted for revision of already completed topics/subjects. And, towards months closer to exam, increase the revision time for proper retention of concepts till exam day.

While revising, make sure you do the following:

  • Review of class notes.
  • Revise underlined/ highlighted portion of text book.
  • Then attempt only the marked questions once more.
  • If time permits, then start with new set of questions.

Make Micro notes:

After finishing every subject make micro notes, which have only principal formulae/ diagrams/ concepts of utmost importance, especially note down the area which you find difficult to remember. Then, once this is done, take a snapshot and store in your mobile gallery. These will be your Digital Micro Notes, which can be revised anywhere and everywhere, while travelling, gap between two classes, free time etc.

Flow like a river:

Be loquacious and discussion oriented with friends and seniors and keep on clearing your doubts, don't allow to accumulate the doubts which may result in mental stress. Also interact with successful seniors and fellow mates to know about their path of success/strategy, it is synonymous with river water which when flows gets self purified.

Evaluate yourself:

  • Take tests in examination environment and make note of areas of difficulty and make a roadmap to improve these before the next test.
  • Stay away from incompetent and non-achievers. Don’t let their failure demoralise you in any sense.

Make holistic and balancing approach:

Cover entire syllabus but more time should be given to important areas. Identify important subjects and mark important topics within a subject. Scoring and low scoring areas should be segregated. Make a balance study plan for technical and non technical subjects. Mathematics and Reasoning Aptitude section is quite scoring in GATE exam.

(II) Strategy for Repeaters:

  • Review your past performance and find the reasons for failure. Consider failure as next stepping step. In fact you are not failed your success is little postponed.
  • Identify weak areas of each subject and start your preparation by first improving these areas.
  • Focus more on solving different types of problems and that too from new source of material in each iteration.
  • Plan your study to maintain regularity and self motivation; daily scheduling and subject wise scheduling is very important for a systematic preparation.
  • Join some good test Series & Appear for tests with full preparation and take the test in examination environment and solve previous years' questions of various exams. Solve previous years’ papers of GATE, may be very useful.
  • To maintain continuity and keeping up the self motivation, form groups of 3-4 friends and make schedule of group study once in a week to discuss complex questions and doubts.

B. Singh (Ex IES)
(CMD, MADE EASY Group)

GATE 2027 Exam Pattern

Now, let's explore the exam pattern of GATE 2027, understand the marks distribution, question types, and paper structure in detail.

QUESTION PAPER PATTERN

Particulars Details
Examination Mode The test papers will be in English. Computer Based Test (CBT) [will be conducted at select centers in select cities].
Duration 3 Hours*
Number of Subjects (Papers) 30
Sections General Aptitude (GA) + Candidate's Selected Subjects
Type of Questions Candidate’s Selected Subject(s)
  • Multiple Choice Questions (MCQ)
  • Multiple Select Questions (MSQ) and/or
  • Numerical Answer Type (NAT) Questions
Questions for testing these abilities
  • Recall
  • Comprehension
  • Application
  • Analysis & Synthesis
Distribution of Marks in all Papers EXCEPT papers AR, CY, DA, EY, GG, MA, PH, ST, XH and XL General Aptitude: 15 marks
Engineering Mathematics**: 13 marks
Subject Questions: 72 marks
Total: 100 marks
(**XE includes Engineering Mathematics section XE-A of 15 marks)
Distribution of Marks in papers AR, CY, DA, EY, GG, MA, PH, ST, XH and XL General Aptitude: 15 marks
Subject Questions: 85 marks
Total: 100 marks
Marking Scheme Questions carry 1 mark or 2 marks
Negative Marking For a wrong answer chosen in an MCQ, there will be negative marking.
For a 1-mark MCQ, 1/3 mark will be deducted for a wrong answer.
For a 2-mark MCQ, 2/3 mark will be deducted for a wrong answer.
There is no negative marking for wrong answer(s) to MSQ or NAT questions.
There is no partial marking in MSQ.
Paper Code General Aptitude (GA) Marks Compulsory Section Subject Marks Total Marks Total Time* (Minutes)
AE, AG, BM, BT, CE, CH, CS, EC, EE, ES, IN, ME, MN, MT, NM, PE, PI, TF; Subject marks in these papers include questions on Engineering Mathematics (13 marks), which are paper-specific. 15 -- 85 100 180
CY, DA, EY, MA, PH, ST 15 -- 85 100 180
AR [Part A is Common and Compulsory for all; Part B1 or Part B2 can be selected during Exam. B1: Architecture or B2: Planning] 15 60 25 100 180
GE [Part A is Common and Compulsory for all; Part B1 or B2 can be selected during the Exam.
B1 - Surveying and Mapping or B2 -Image Processing and Analysis.]
15 55 30 100 180
GG [Part A is Common and Compulsory for all; Part B can either be Geology (B1) or Geophysics (B2) -- which must be chosen at the time of Application.] 15 25 60 100 180
XE [Section A (Engineering Mathematics) is Common and Compulsory for all; Applicants must select any TWO additional Sections during the Exam] 15 15 2 x 35 100 180
XH [Section B1 (Reasoning and Comprehension) is Common and Compulsory for all; Applicants must select any ONE additional Section at the time of Application] 15 25 60 100 180
XL [Section P (Chemistry) is Common and Compulsory for all; Applicants must select any TWO additional Sections during the Exam] 15 25 2 x 30 100 180

*PwD candidates with benchmark disability greater than 40% are eligible for compensatory time of one hour. PwD candidates with less than 40% disability and having difficulty in writing are eligible for compensatory time subject to production of a certificate as stated.

GATE 2027 Exam Syllabus

Get familiar with the GATE exam syllabus, including subject-wise topics and weightage. Here, we have mentioned the syllabus for different streams. A clear grasp of the syllabus helps you prioritize and prepare strategically for maximum scores.

GATE 2027 will be conducted for 30 test papers. The following table shows the list of papers with codes.

A candidate is allowed to appear either in ONE or UP TO TWO test papers. Please visit the page Two-Paper Combination for more details.

Branch/Discipline: Civil Engineering

Section 1: Engineering Mathematics

  • Linear Algebra: Matrix algebra; Systems of linear equations; eigenvalues and eigenvectors.
  • Calculus: Functions of single variable; Limit, continuity and differentiability; Mean value theorems, local maxima and minima; Taylor series; Evaluation of definite and indefinite integrals, application of definite integral to obtain area and volume; Partial derivatives; Total derivative; Gradient, Divergence and Curl, Vector identities; Directional derivatives; Line, Surface and Volume integrals.
  • Ordinary Differential Equation (ODE): First order (linear and non-linear) equations; higher order linear equations with constant coefficients; Euler-Cauchy equations; initial and boundary value problems.
  • Partial Differential Equation (PDE): Fourier series; Separation of variables; solutions of one-dimensional diffusion equation; first and second order one-dimensional wave equation and two-dimensional Laplace equation.
  • Probability and Statistics: Basic concepts of probability – axioms and theorems, statistical independence; Conditional probability; Descriptive statistics – Mean, median, mode and standard deviation; Random Variables – Probability mass function, probability density function, cumulative distribution function; Poisson and Normal Distribution; Linear regression.
  • Numerical Methods: Error analysis. Numerical solutions of linear and nonlinear algebraic equations; Newton’s and Lagrange polynomials; numerical differentiation; Integration by trapezoidal and Simpson’s rule; Single and multi-step methods for firstorder differential equations.

Section 2: Structural Engineering

  • Engineering Mechanics: System of forces, free-body diagrams, equilibrium equations; Internal forces in structures; Frictions and its applications; Centre of mass.
  • Solid Mechanics: Bending moment and shear force in statically determinate beams; Transformation of stress (Mohr’s circle); Simple stress and strain relationships; Simple bending theory, flexural and shear stresses, shear centre; Uniform torsion; Combined stresses; Column buckling.
  • Structural Analysis: Principle of superposition; Work and energy methods: Principle of virtual work, Castigliano's second theorem; Deflections of statically determinate beams, frames, and trusses; Analysis of statically indeterminate structures by force and displacement methods (method of consistent deformations, slopedeflection method, moment distribution method); Influence lines and moving loads; Stiffness matrix method; Analysis of determinate arches and cables.
  • Concrete Structures: Working stress and limit state design concepts; Design and detailing of beams, slabs, columns, and isolated footings; Bond and development length.
  • Steel Structures: Working stress and limit state design concepts; Design of tension and compression members, beams and beam-columns, column bases; Connections – simple and eccentric, beam-column connections; Concept of plastic analysis – beams and portal frames.

Section 3: Geotechnical Engineering

  • Soil Mechanics: Three-phase system and phase relationships, index properties; Unified and Indian standard soil classification system; Permeability – one dimensional flow, Seepage through soils – two-dimensional flow, flow nets, uplift pressure, piping, capillarity, seepage force; Principle of effective stress and quicksand condition; Compaction of GATE 2027 IIT Madras | Organizing Institute
    soils; One-dimensional consolidation, time rate of consolidation; Shear Strength, Mohr’s circle, effective and total shear strength parameters; Stress-strain characteristics of clays and sand; Stress paths.
  • Foundation Engineering: Sub-surface investigations – Drilling bore holes, sampling, plate load test, standard penetration and cone penetration tests; Earth pressure theories – Rankine and Coulomb; Stability of slopes – Finite and infinite slopes, Bishop’s method; Sheet Piles; Stress distribution in soils – Boussinesq’s theory; Pressure bulbs; Shallow foundations – Terzaghi’s and Meyerhof’s bearing capacity theories, effect of water table; Combined footing and raft foundation; Contact pressure; Settlement analysis in sands and clays; Deep foundations – static formulae,
    axial load capacity of piles in sands and clays, pile load test, pile under lateral loading, pile group efficiency, negative skin friction; Ground improvement techniques.

Section 4: Water Resources Engineering

  • Fluid Mechanics: Properties of fluids, fluid statics; Continuity, momentum and energy equations and their applications; Potential flow, Laminar and turbulent flow; Flow in pipes, pipe networks; Concept of boundary layer and its growth; Concept of lift and drag.
  • Hydraulics: Forces on immersed bodies; Flow measurement in channels and pipes; Dimensional analysis and hydraulic similitude; Channel Hydraulics – Energy-depth relationships, specific energy, critical flow, hydraulic jump, uniform flow, gradually varied flow and water surface profiles; Prismatic and mobile channels, steady and unsteady flows, rapidly varied flow and hydraulic jump; Flow past sharp crested weirs.
  • Hydrology: Hydrologic cycle, precipitation, evaporation, evapo-transpiration, watershed, infiltration; Streamflow measurements, unit hydrographs, hydrograph analysis, reservoir capacity, flood estimation and routing, surface runoff models, ground water hydrology – steady state well hydraulics and aquifers; Application of Darcy’s Law.
  • Irrigation: Types of irrigation systems and methods; Crop water requirements – Duty, delta, evapo-transpiration; Gravity dams and spillways; Lined and unlined canals, Design of weirs on permeable foundation; cross drainage structures; River training structures; Earthen dams; Seepage through dams; Well irrigation.

Section 5: Environmental Engineering

  • Water and Waste Water Quality and Treatment: Basics of water quality standards – Physical, chemical and biological parameters; Water quality index; Unit processes and operations; Water requirement; Water distribution system; Drinking water treatment
  • Sewerage system design, quantity of domestic wastewater, primary, secondary and tertiary treatment. Effluent discharge standards; Sludge treatment and disposal; Reuse of treated sewage for different applications.
  • Air Pollution: Types of pollutants, their sources and impacts, air pollution control, air quality standards, Air quality index and limits.
  • Municipal Solid Wastes: Characteristics, generation, collection and transportation of solid wastes, engineered systems for solid waste management (reuse/recycle, energy recovery, treatment and disposal); Basics of landfill design and operation.

Section 6: Transportation Engineering

  • Transportation Infrastructure: Geometric design of roadways using IRC codes – crosssectional elements, sight distances, classifications of roadways, design vehicle, horizontal and vertical alignments.
  • Geometric design of railway Track – Speed and Cant.
  • Concept of airport runway length, calculations and corrections; taxiway and exit taxiway design.
  • Highway Pavements: Highway materials – desirable properties and tests; Desirable properties of bituminous paving mixes; Design factors for flexible and rigid pavements; Design of flexible and rigid pavement using IRC codes.
  • Traffic Engineering: Traffic studies on flow and speed, peak hour factor, accident study, statistical analysis of traffic data; Microscopic and macroscopic parameters of traffic flow, fundamental relationships; Traffic signs; Signal design by Webster’s method; Types of intersections and interchanges; Highway capacity and level of service.
  • Transportation Planning: Four step travel demand modelling – trip generation, trip distribution, mode choice, traffic assignment and its applications.

Section 7: Geomatics Engineering

  • Principles of surveying; Plane and geodetic surveying, GNSS surveying, errors and their adjustment; Maps – Scale, coordinate system; Distance and angle measurement – Levelling and trigonometric levelling; Traversing and triangulation survey; Total station; Principles of topographic, cadastral, engineering; Introduction to cartography, map projections.
  • Photogrammetry – Introduction to photogrammetry, digital photogrammetry, photographic scale, flying height; Space resection, parallax equations, elevations by parallax differences, camera calibration.

Section 8: Construction Materials and Management

  • Construction Materials: Steel – Composition, material properties and behaviour; Cement – composition, hydration and microstructure, chemical and mineral admixtures; Concrete – Constituents, mix design, short-term and long-term properties.
  • Construction Management: Types of construction projects; Estimation and costing – Quantity estimation using long wall and short wall method, center line method, analysis of rates; Project planning and scheduling: AOA and AON network analysis – PERT and CPM; Project updating and monitoring; Construction equipment – Equipment for earthwork, concreting, hoisting and transportation of materials; Types of contracts.

 

Branch/Discipline: Computer Science & Information Technology

Section 1: Engineering Mathematics

  • Discrete Mathematics: Propositional and first order logic. Sets, relations, functions, partial orders and lattices. Monoids, Groups. Graphs: connectivity, matching, colouring. Combinatorics: counting, recurrence relations, generating functions.
  • Linear Algebra: Matrices, determinants, system of linear equations, eigenvalues and eigenvectors, LU decomposition.
  • Calculus: Limits, continuity and differentiability, Maxima and minima, Mean value theorem, Integration.
  • Probability and Statistics: Random variables, Uniform, normal, exponential, Poisson and binomial distributions. Mean, median, mode and standard deviation. Conditional probability and Bayestheorem.

Section 2: Digital Logic

  • Boolean algebra and minimization – algebraic technique, Karnaugh map, tabular method. Design of combinational and sequential circuits. Number representation and arithmetic (fixed and floating point).

Section 3: Computer Organization and Architecture

  • Instruction set and addressing modes. Design of arithmetic and logic unit (ALU). Design of control unit – hardwired and microprogrammed. Memory interfacing and hierarchy: performance, cache memory mapping. I/O interface (interrupt and DMA). Instruction pipelining, pipeline hazards.

Section 4: Programming and Data Structures

  • Programming in C. Recursion. Arrays, stacks, queues, linked lists, trees, binary search trees, binary heaps, graphs.

Section 5: Algorithms

  • Searching, sorting, hashing. Asymptotic worst case time and space complexity. Algorithm design techniques: greedy, dynamic programming and divide-and-conquer. Graph traversals, minimum spanning trees, shortest paths.

Section 6: Theory of Computation

  • Regular expressions and finite automata. Context-free grammars and push-down automata. Regular and context-free languages, pumping lemma. Turing machines and undecidability.

Section 7: Compiler Design

  • Lexical analysis, parsing, syntax-directed translation. Runtime environments. Intermediate code generation. Local optimisation, Data flow analyses: constant propagation, liveness analysis, common sub expression elimination.

Section 8: Operating System

  • System calls, processes, threads, inter-process communication, concurrency and synchronization. Deadlock. CPU and I/O scheduling. Memory management and virtual memory. File systems.

Section 9: Databases

  • ER-model. Relational model: relational algebra, tuple calculus, SQL. Integrity constraints, normal forms. Fileorganization, indexing (e.g., B and B+ trees). Transactions and concurrency control.

Section 10: Computer Networks

  • Principles of Layering; Basics of switching (circuit, packet and virtual circuit) and performance metrics; Data link layer: error detection, Medium Access Control, Ethernet; Distance vector and link state routing; IPv4 - Fragmentation, CIDR Notation, Network Address Translation; TCP- flow control and congestion control, socket API; DNS and HTTP.

Branch/Discipline: Data Science & Artificial Intelligence

GATE New Test Paper on (DA) Data Science and Artificial Intelligence Syllabus

  • Probability and Statistics: Counting (permutation and combinations), probability axioms, Sample space, events, independent events, mutually exclusive events, marginal, conditional and joint probability, Bayes Theorem, conditional expectation and variance, mean, median, mode and standard deviation, correlation, and covariance, random variables, discrete random variables and probability mass functions, uniform, Bernoulli, binomial distribution, Continuous random variables and probability distribution function, uniform, exponential, Poisson, normal, standard normal, tdistribution, chi-quared distributions, cumulative distribution function, Conditional PDF, Central limit theorem, confidence interval, z-test, t-test, chi-squared test.
  • Linear Algebra: Vector space, subspaces, linear dependence and independence of vectors, matrices, projection matrix, orthogonal matrix, idempotent matrix, partition matrix and their properties, quadratic forms, systems of linear equations and solutions; Gaussian elimination, eigenvalues and eigenvectors, determinant, rank, nullity, projections, LU decomposition, singular value decomposition.
  • Calculus and Optimization: Functions of a single variable, limit, continuity and differentiability, Taylor series, maxima and minima, optimization involving a single variable.
  • Programming, Data Structures and Algorithms: Programming in Python, basic data structures: stacks, queues, linked lists, trees, hash tables; Search algorithms: linear search and binary search, basic sorting algorithms: selection sort, bubble sort and insertion sort; divide and conquer: mergesort, quicksort; introduction to graph theory; basic graph algorithms: traversals and shortest path.
  • Database Management and Warehousing: ER-model, relational model: relational algebra, tuple calculus, SQL, integrity constraints, normal form, file organization, indexing, data types, data transformation such as normalization, discretization, sampling, compression; data warehouse modelling: schema for multidimensional data models, concept hierarchies, measures: categorization and computations.
  • Machine Learning:
  • Supervised Learning: regression and classification problems, simple linear regression, multiple linear regression, ridge regression, logistic regression, k-nearest neighbour, naive Bayes classifier, linear discriminant analysis, support vector machine, decision trees, bias-variance trade-off, cross-validation methods such as leave-one-out (LOO) cross-validation, k-folds cross-validation, multi-layer perceptron, feed-forward neural network;
  • Unsupervised Learning: clustering algorithms, k-means/k-medoid, hierarchical clustering, top-down, bottom-up: single-linkage, multiple-linkage, dimensionality reduction, principal component analysis.
  • AI: Search: informed, uninformed, adversarial; logic, propositional, predicate; reasoning under uncertainty topics — conditional independence representation, exact inference through variable elimination, and approximate inference through sampling

Branch/Discipline: Electrical Engineering

Section 1: Engineering Mathematics

  • Linear Algebra: Matrix Algebra, Systems of linear equations, Eigen values, Eigen vectors.
  • Calculus: Mean value theorems, Theorems of integral calculus, Evaluation of definite and improper integrals, Partial Derivatives, Maxima and minima, Multiple integrals, Fourier series, Vector identities, Directional derivatives, Line integral, Surface integral, Volume integral, Stokes’s theorem, Gauss’s theorem, Divergence theorem, Green’s theorem.
  • Differential equations: First order equations (linear and nonlinear), Higher order linear differential equations with constant coefficients, Method of variation of parameters, Cauchy’s equation, Euler’s equation, Initial and boundary value problems, Partial Differential Equations, Method of separation of variables.
  • Complex variables: Analytic functions, Cauchy’s integral theorem, Cauchy’s integral formula, Taylor series, Laurent series, Residue theorem, Solution integrals.
  • Probability and Statistics: Sampling theorems, Conditional probability, Mean, Median, Mode, Standard Deviation, Random variables, Discrete and Continuous distributions, Poisson distribution, Normal distribution, Binomial distribution, Correlation analysis, Regression analysis.

Section 2: Electric circuits

  • Network elements: Ideal voltage and current sources, dependent sources, R, L, C, M elements; Network solution methods: KCL, KVL, Node and Mesh analysis; Network Theorems: Thevenin’s, Norton’s, Superposition and Maximum Power Transfer theorem; Transient response of DC and AC networks, sinusoidal steady-state analysis, resonance, two port networks, balanced three phase circuits, star-delta transformation, complex power and power factor in AC circuits.

Section 3: Electromagnetic Fields

  • Coulomb's Law, Electric Field Intensity, Electric Flux Density, Gauss's Law, Divergence, Electric field and potential due to point, line, plane and spherical charge distributions, Effect of dielectric medium, Capacitance of simple configurations, Biot-Savart’s law, Ampere’s law, Curl, Faraday’s law, Lorentz force, Inductance, Magnetomotive force, Reluctance, Magnetic circuits, Self and Mutual inductance of simple configurations.

Section 4: Signals and Systems

  • Representation of continuous and discrete time signals, shifting and scaling properties, linear time invariant and causal systems, Fourier series representation of continuous and discrete time periodic signals, sampling theorem, Applications of Fourier Transform for continuous and discrete time signals, Laplace Transform and Z transform. R.M.S. value, average value calculation for any general periodic waveform.

Section 5: Electrical Machines

  • Single phase transformer: equivalent circuit, phasor diagram, open circuit and short circuit tests, regulation and efficiency;
  • Three-phase transformers: connections, vector groups, parallel operation; Auto-transformer, Electromechanical energy conversion principles;
  • DC machines: separately excited, series and shunt, motoring and generating mode of operation and their characteristics, speed control of dc motors;
  • Three-phase induction machines: principle of operation, types, performance, torque-speed characteristics, no-load and blocked-rotor tests, equivalent circuit, starting and speed control; Operating principle of single-phase induction motors;
  • Synchronous machines: cylindrical and salient pole machines, performance and characteristics, regulation and parallel operation of generators, starting of synchronous motors; Types of losses and efficiency calculations of electric machines

Section 6: Power Systems

  • Basic concepts of electrical power generation, AC and DC transmission concepts, Models and performance of transmission lines and cables, Economic Load Dispatch (with and without considering transmission losses), Series and shunt compensation, Electric field distribution and insulators, Distribution systems, Per-unit quantities, Bus admittance matrix, Gauss- Seidel and Newton-Raphson load flow methods, Voltage and Frequency control, Power factor correction, Symmetrical components, Symmetrical and unsymmetrical fault analysis, Principles of over-
    current, differential, directional and distance protection; Circuit breakers, System stability concepts, Equal area criterion.

Section 7: Control Systems

  • Mathematical modelling and representation of systems, Feedback principle, transfer function, Block diagrams and Signal flow graphs, Transient and Steady-state analysis of linear time invariant systems, Stability analysis using Routh-Hurwitz and Nyquist criteria, Bode plots, Root loci, Lag, Lead and Lead-Lag compensators; P, PI and PID controllers; State space model, Solution of state equations of LTI systems.

Section 8: Electrical and Electronic Measurements

  • Bridges and Potentiometers, Measurement of voltage, current, power, energy and power factor; Instrument transformers, Digital voltmeters and multi-meters, Phase, Time and Frequency measurement; Oscilloscopes, Error analysis.

Section 9: Analog and Digital Electronics

  • Simple diode circuits: clipping, clamping, rectifiers;
  • Amplifiers: biasing, equivalent circuit and frequency response; oscillators and feedback amplifiers;
  • Amplifiers: characteristics and applications; single stage active filters, Active Filters: Sallen Key, Butterwoth, VCOs and timers, combinatorial and sequential logic circuits, multiplexers, demultiplexers, Schmitt triggers, sample and hold circuits, A/D and D/A converters.

Section 10: Power Electronics

  • Static V-I characteristics and firing/gating circuits for Thyristor, MOSFET, IGBT; DC to DC conversion: Buck, Boost and Buck-Boost Converters; Single and three-phase configuration of uncontrolled rectifiers; Voltage and Current commutated Thyristor based converters; Bidirectional ac to dc voltage source converters; Magnitude and Phase of line current harmonics for uncontrolled and thyristor based converters; Power factor and Distortion Factor of AC to DC converters; Single-phase and three-phase voltage and current source inverters, sinusoidal pulse width modulation.

Branch/Discipline: Electronics & Communication Engineering

Section 1: Engineering Mathematics

  • Linear Algebra: Vector space, basis, linear dependence and independence, matrix algebra, eigen values and eigen vectors, rank, solution of linear equations - existence and uniqueness.
  • Calculus: Mean value theorems, theorems of integral calculus, evaluation of definite and improper integrals, partial derivatives, maxima and minima, multiple integrals, line, surface and volume integrals, Taylor series.
  • Differential Equations: Linear differential equations, Euler-Cauchy equation, Nonhomogeneous equations, methods of solution using variation of parameters, complementary function and particular integral, partial differential equations, variable separable method, initial and boundary value problems.
  • Vector Analysis: Vectors in plane and space, vector operations, gradient, divergence and curl, Gauss's, Green's and Stokes’ theorems.
  • Complex Analysis: Analytic functions, Cauchy’s integral theorem, Cauchy’s integral formula, sequences, series, convergence tests, Taylor and Laurent series, residue theorem.
  • Probability and Statistics: Mean, median, mode, standard deviation, combinatorial probability, probability distributions, binomial distribution, Poisson distribution, exponential distribution, normal distribution, joint and conditional probability, correlation and regression analysis.

Section 2: Networks, Signals and Systems

  • Circuit analysis: Node and mesh analysis, superposition, Thevenin's theorem, Norton’s theorem, reciprocity. Sinusoidal steady state analysis: phasors, complex power, maximum power transfer.
  • Time and frequency domain analysis of linear circuits: RL, RC and RLC circuits, solution of network equations using Laplace transform. Linear 2-port network parameters, wye-delta transformation.
  • LTI systems: definition and properties, causality, stability, impulse response, convolution, poles and zeroes, frequency response, group delay, phase delay.
  • Continuous-time signals: Fourier series and Fourier transform, Nyquist sampling theorem, sampling and reconstruction.
  • Discrete-time signals: DTFT, DFT, z-transform, FIR and IIR filter design.

Section 3: Electronic Devices

  • Formation of energy bands in solids, energy bands in intrinsic and extrinsic semiconductors, equilibrium carrier concentration, direct and indirect band-gap semiconductors.
  • Carrier transport: Diffusion current, drift current, mobility and resistivity, generation and recombination of carriers, Poisson and continuity equations.
  • P-N junction, Zener diode, BJT, MOS capacitor, MOSFET, scaling in MOSFETs, LED, photo diode and solar cell.

Section 4: Analog Circuits

  • Diode circuits: Clipping, clamping and rectifiers.
  • BJT and MOSFET amplifiers: Biasing, AC coupling, small signal analysis, frequency response. Current mirrors and differential amplifiers.
  • Op-amp circuits: Amplifiers, summers, differentiators, integrators, active filters, Schmitt trigger and oscillators, dominant-pole (Miller) compensation, phase margin.

Section 5: Digital Circuits

  • Number representations: Binary, integer and floating-point- numbers. Combinatorial circuits: Boolean algebra, minimization of functions using Boolean identities and Karnaugh map, logic gates and their static CMOS implementations, arithmetic circuits, code converters, multiplexers, decoders.
  • Sequential circuits: Latches and flip-flops, counters, shift-registers, finite state machines, propagation delay, setup and hold time, critical path delay.
  • Data converters: sample and hold circuits, ADCs and DACs.
  • Semiconductor memories: ROM, SRAM, DRAM.
  • Computer organization: Machine instructions and addressing modes, ALU, data-path and control unit, instruction pipelining.

Section 6: Control Systems

  • Basic control system components; Feedback principle; Transfer function; Block diagram representation; Signal flow graph; Transient and steady-state analysis of LTI systems; Frequency response; Routh-Hurwitz and Nyquist stability criteria; Bode and root-locus plots; compensators, PID controller; State variable model and solution of state equation of LTI systems.

Section 7: Communications

  • Random processes: Autocorrelation and power spectral density, properties of white noise, filtering of random signals through LTI systems.
  • Analog communications: Amplitude modulation and demodulation, angle modulation and demodulation, spectra of AM and FM, super heterodyne receivers.
  • Information theory: Entropy, source coding, mutual information and channel capacity theorem.
  • Digital communications: PCM, DPCM, digital modulation schemes (ASK, PSK, FSK, QAM), bandwidth, intersymbol interference, MAP, ML detection, matched filter receiver, SNR and BER. Fundamentals of error correction, Hamming codes, CRC.

Section 8: Electromagnetics

  • Maxwell's equations: Differential and integral forms and their interpretation, boundary conditions, wave equation, Poynting vector.
  • Plane waves and properties: Reflection and refraction, polarization, phase and group velocity, propagation through various media, skin depth.
  • Transmission lines: Equations, characteristic impedance, impedance matching, impedance transformation, Sparameters, Smith chart. Rectangular and circular waveguides, light propagation in optical fibers, dipole and monopole antennas, linear antenna arrays.

Branch/Discipline: Environmental Science and Engineering

Section 1: Mathematics Foundation

  • Linear Algebra: Determinants and matrices, Systems of linear equations, Eigenvalues and eigenvectors.
  • Calculus: Functions, Limit, Continuity, Differentiability, Local maxima and minima, Taylor series, Tests for convergence, Definite and indefinite integrals, Application of definite integral to obtain area and volume, Partial and total derivatives, Linear and non-linear first order ordinary differential equations (ODE).
  • Numerical Method: Approximation, errors, accuracy and precision in numerical methods; Numerical solutions (roots) of linear and non-linear algebraic equations; Interpolation and curve fitting - Least square approximation, Newton’s and Lagrange polynomials; Numerical differentiation and integration - trapezoidal and Simpson’s rule; Numerical solution of ordinary differential equations - single and multi-step methods.
  • Probability and Statistics: Descriptive statistics, Measurement of central tendency, Dispersion, Skewness and kurtosis, Probability concepts, Conditional probability, Bayes theorem, Risk and reliability, Probability distributions, Correlation, Single and multiple regression models, Hypothesis testing (t-test, F-test, chi-square test).

Section 2: Environmental Chemistry

  • Fundamentals of Environmental Chemistry: Covalent and ionic bonding; Chemical equations, concentration and activity; Structure and chemistry of organic molecules; Chemical equilibria; Thermodynamics and kinetics of chemical reactions.
  • Principles of water chemistry: Water quality parameters and their measurement; Acid-base equilibria; Buffer solution; Carbonate equilibrium; Solubility of gases in water; Complexation, precipitation, and redox reactions; Inorganic and organic contaminants.
  • Soil chemistry: Organic matter, nitrogen, phosphorous, potassium, cation exchange capacity, base saturation, and sodium absorption ratio.
  • Atmospheric Chemistry: Composition of the atmosphere; Reactivity of trace substances in the atmosphere; Chemistry of ozone formation.

Section 3: Environmental Microbiology

  • Prokaryotic and eukaryotic microorganisms: Characteristics of diverse groups of microorganisms; Classification of microorganisms; Microbial diversity; Plant-microbe and soilmicrobe interactions; Role of microorganisms in wastewater treatment, bioremediation and biogeochemical cycling.
  • Cell chemistry and cell biology: Structure of proteins, nucleic acid (DNA & RNA), lipids and polysaccharides; Bonds in biomolecules; Stereoisomerism in biomolecules; Structure of cell; Structure and function of cytoplasmic membrane, cell wall, outer membrane, glycocalyx, chromosomes, endospores, storage products, mitochondria and chloroplasts.
  • Microbial metabolism: Anabolism and catabolism; Phosphorylation; Glycolysis; TCA cycle; Electron transport chain; Fermentation; Anaerobic respiration; Energy balances; Enzymes and Enzyme kinetics.
  • Growth and control of microorganisms: Bacterial nutrition and growth; Specific growth rate and doubling time; Monod’s model; Types of culture media; Batch and continuous culture; Effects of environmental factors on growth; Control of microbes using physical and chemical methods.
  • Microbiology and health: Pathogens and modes of transmission; Indicator organisms; Quantification of coliforms using MPN and membrane filtration techniques.

Section 4: Water Resources and Environmental Hydraulics

  • Global Water Resources: , properties and distribution of water; Water quality; Threats to water resources; Water conservation.
  • Surface Water Resources: Hydrological cycle and water balance - precipitation, infiltration, evapotranspiration, runoff; Flow hydrographs; Unit hydrographs; Stage-discharge relationship; Reservoir capacity; Reservoir and channel routing; Surface run-off models; Surface water management; Rain water harvesting and storage.
  • Groundwater Resources: Geologic formations as aquifers; Vadose and saturated zones; Confined and unconfined aquifers and their parameters - porosity, permeability, transmissivity and storage coefficient; Darcy’s law and applications; Steady state well hydraulics.
  • Environmental Hydraulics: Concepts of mechanics; Properties of fluids; Pressure measurement; Hydrostatic force on surfaces; Buoyancy and flotation; Laminar and turbulent flow; Flow through pipes; Pipe networks; Boundary layer theory; Forces on immersed bodies; Flow measurement in channels and pipes; Kinematics of flow; Continuity, momentum and energy equations; Channel hydraulics - specific energy, critical flow, hydraulic jump, rapid and gradually varied flow; Design of lined and unlined channels.

Section 5: Water & Wastewater Treatment and Management

  • Water and wastewater quality parameters: Eutrophication and thermal stratification in lakes; River pollution - Oxygen sag curve.
  • Water treatment methods - screening, sedimentation with and without coagulation, filtration, desalination, disinfection; Water distribution and storage
  • Point and non-point sources of wastewater: Population forecasting methods; Design of sewer and storm water sewers; Sewer appurtenances; Preliminary, primary, secondary and tertiary sewage treatment; Sludge generation, processing and disposal methods; Sewage farming.
  • Sources and characteristics of industrial effluents: Concept of Common Effluent Treatment Plants (CETP); Wastewater recycling and zero liquid discharge.
  • Kinetics and reactor design: Mass and energy balance, Order and rate of reactions, Batch reactors, Completely mixed flow reactors, Plug flow reactors.

Section 6: Air and Noise Pollution

  • Structure of the atmosphere: Natural and anthropogenic sources of pollution; Atmospheric sources, sinks, transport; Indoor air pollution; Effects on health and environment; Air pollution: gases and particulate matter; Air quality standards; Primary and secondary pollutants; Criteria pollutants, ambient and source standards, air quality indices, visibility.
  • Particulate pollutants: measurement and control methods; Control of particulate air pollutants using gravitational settling chambers, cyclone separators, wet collectors, fabric filters (Baghouse filter), electrostatic precipitators (ESP).
  • Gaseous Pollutants: Measurement and control methods; Control of gaseous contaminants: absorption, adsorption, condensation and combustion; Control of sulphur oxides, nitrogen oxides, carbon monoxide, and hydrocarbons; Diffusion, Fick’s law and interfacial mass transfer. Vehicular emission control systems, including diesel particulate filters (DPFs), catalytic converters, and fuel standards.
  • Air quality management: Point, line and area sources; Inventory; Meteorology and dispersion; atmospheric stability and inversion, mixing height, wind rose diagrams, Gaussian plume dispersion modelling, and topographic influences.
  • Noise pollution: Sources; Health effects; Standards; Measurement parameters (sound pressure level, equivalent continuous sound level Leq, day-night level Ldn); frequency analysis; and control and mitigation methods.

Section 7: Solid and Hazardous Waste Management

  • Integrated solid waste management: Waste hierarchy; Rules and regulations for solid waste management in India
  • Municipal solid waste management: Sources, generation, characteristics, collection and transportation, waste processing and disposal (including reuse options, biological methods, energy recovery processes and landfilling).
  • Hazardous waste management: Characteristics, generation, fate of materials in the environment, treatment and disposal.
  • Soil contamination and leaching of contaminants into groundwater
  • Management of biomedical waste, plastic waste, waste from energy sector (solar/wind/batteries etc), C&D waste and E-waste: Sources, generation and characteristics; Waste management practices including storage, collection and transfer

Section 8: Global and Regional Environmental Issues

  • Global effects of air pollution – Greenhouse gases, global warming, climate change, urban heat islands, acid rain, ozone hole.
  • Ecology and various ecosystems; Biodiversity; Factors influencing increase in population, energy consumption, and environmental degradation.

Section 9: Environmental Management and Sustainable Development

  • Environmental Management Systems; ISO14000 series; Environmental auditing: Environmental Impact Assessment; Life cycle assessment; Human health risk assessment
  • Environmental Law and Policy – Objectives; Polluter pays principle, Precautionary principle; The Water and Air Acts with amendments; The Environment (Protection) Act (EPA) 1986; National Green Tribunal Act, 2010; National Environment Policy; Principles of International Law and International treaties.
  • Energy and Environment: Energy sources – overview of resources and reserves; Renewable and non-renewable energy sources; Energy-Environment nexus.
  • Sustainable Development: Definition and concepts of sustainable development; Sustainable development goals; Hurdles to sustainability; Environment and economics; carbon pricing, emission trading, Environmental, Social, and Governance (ESG) frameworks.

Branch/Discipline: Instrumentation Engineering

Section 1: Engineering Mathematics

  • Linear Algebra: Matrix algebra, systems of linear equations, consistency and rank, eigenvalues and eigenvectors, tensors
  • Calculus: Functions, limits, continuity; differentiation, differentiability, partial derivatives, maxima and minima, integration, multiple integrals, vector algebra, line, surface and volume integrals, Stokes, Gauss and Green’s theorems.
  • Differential equations: Ordinary differential equations, first order linear differential equations, second order linear differential equations with constant coefficients, method of variation of parameters, Cauchy’s and Euler’s equations, initial and boundary value problems, solution of partial differential equations: variable separable method.
  • Analysis of complex variables: Analytic functions, Cauchy’s integral theorem and integral formula, Taylor’s and Laurent’s series, residue theorem, solution of integrals.
  • Probability and Statistics: Random variables, discrete and continuous distributions: normal, Poisson and Binomial distributions. Sampling from distributions, conditional probability and Bayes' theorem, mean, median, mode, standard deviation and variance.
  • Numerical Methods: Solution of matrix equations, solutions of non-linear algebraic equations, iterative methods for solving differential equations, numerical integration, regression and correlation analysis, backpropagation for neural networks.

Section 2: Electricity and Magnetism

  • Coulomb's law, electric field intensity, electric flux density, Gauss' law, electric field and potential due to point, line, plane and spherical charge distributions, effect of dielectric medium, permittivity, capacitance, magnetic field intensity, magnetic flux density, Biot-Savart’s law, Ampere’s law, Faraday’s law, Lorentz force, permeability, self and mutual inductance, electrical and magnetic dipoles, electromagnetic induction, magnetomotive force, reluctance, magnetic circuits, B-H curve, Maxwell's equations: vector, differential and integral forms.

Section 3: Electrical Circuits and Machines

  • Independent, dependent, ideal and practical sources; V-I characteristics of practical current and voltage sources, battery, solar cell, resistor, inductor, coupled inductor, capacitor; transient analysis of RC, RL, LC, RLC circuits; power and energy consumption, power rating of components, efficiency and losses.
  • Kirchhoff’s laws, mesh and nodal analysis, star-delta transformation, superposition, Thevenin’s, Norton’s, Miller’s, maximum power transfer and reciprocity theorems.
  • Peak, average and rms values of AC quantities; apparent, active and reactive powers, power factor; phasor analysis, impedance and admittance; series and parallel resonance, locus diagrams, realization of basic filters with R, L, and C elements; transient analysis of RLC circuits with AC excitation.
  • Analysis of one-port and two-port networks with controlled voltage and current sources, driving point impedance and admittance, open and short circuit parameters.
  • Electrical Machines: Single phase transformers, permanent magnet synchronous machines; buck and boost converters, rectifiers, single phase inverters; rotor position and speed sensing, current sensing, pulse width modulation (PWM) control.

Section 4: Signals and Systems

  • Periodic, aperiodic and impulse signals; sampling; Fourier series, Laplace, Fourier and z-transforms, DFT and FFT; continuous-time and discrete-time systems, transfer function, linear time invariant systems, impulse response, frequency response, pulse transfer function; convolution, correlation; basics of IIR and FIR filters.

Section 5: Control Systems

  • Feedback principles, role of sensing in feedback, signal flow graphs, transient response, steady state error, Bode plot, phase and gain margins, Routh and Nyquist criteria, root loci, state-space representation of systems; time-delay systems.
  • Actuators for control system: control valves, servo valves, servo motors, stepper motors; on-off, P, PI, PID, cascade, feed forward, and ratio controllers, tuning of PID controllers; design of lead, lag and lead-lag compensators; basic concept of supervisory control, basics of distributed control system (DCS) and programmable logic controller (PLC).

Section 6: Analog Electronics

  • Types of diode and their applications; BJT and MOSFET circuits, biasing, power dissipation, DC analysis, small signal analysis, frequency response of transistor circuits, feedback, amplifier design. Characteristics of ideal and practical operational amplifiers; applications of opamps: adder, subtractor, integrator, differentiator, difference amplifier, instrumentation amplifier, precision rectifier, active filters, comparators, Schmitt trigger, multivibrators, oscillators, signal generators, voltage-controlled oscillators and phase-locked loop.
  • Sources and effects of noise and interference in electronic circuits; conductively, capacitively, inductively coupled interference; noise generated by electronic components, thermal noise, shot noise, flicker noise; shielding and grounding. Basic principles of component selection based on specifications, circuit board realization and testing.

Section 7: Digital Electronics

  • Basics of number systems. Combinational logic circuits, multiplexer and demultiplexer, truth table, minimization of Boolean functions; IC families: ECL, TTL and CMOS, CMOS implementation of logic gates; arithmetic circuits, sequential circuits, finite state machines, flipflops, shift registers, timers and counters.
  • Analog front end: analog multiplexer, programmable gain amplifier, sample-and-hold circuit; analog-to-digital converters (ADC) (successive approximation, integrating, flash and sigma-delta) and digital-to-analog converters (DAC) (weighted R, R-2R ladder and current steering logic); characteristics and specifications of ADC and DAC (dynamic range, resolution, quantization, significant bits, conversion/settling time, INL, DNL, ENOB); embedded systems: common microprocessors and microcontrollers, memory and input-output interfacing, embedded systems programming; basics of data acquisition systems, virtual instrumentation, IoT; basic AI applications in instrumentation (sensor linearization, system calibration and tuning, signal classification).

Section 8: Measurements

  • SI units, standards of basic electrical quantities (R, L, C, voltage, current and frequency), systematic and random errors in measurement, expression of uncertainty, accuracy and precision, propagation of errors, linear and weighted regression; bridges: Wheatstone, Kelvin, Maxwell, Anderson, Schering and Wien bridges for measurement of R, L, C and frequency, typical applications of bridges, Q-meter; megohm measurement; measurement of voltage, current and power in DC, single and three phase AC circuits; contact and noncontact type AC and DC current and voltage probes; true rms meters, voltage and current scaling, instrument transformers, timer/counter, time, phase and frequency measurements, digital voltmeter, digital multimeter, digital energy meter, digital storage oscilloscope, spectrum analyzer.

Section 9: Sensors and Industrial Instrumentation

  • Resistive, capacitive, inductive, piezoelectric, electromagnetic and Hall effect sensors and associated signal conditioning circuits; transducers for industrial instrumentation: displacement, velocity, acceleration (linear and angular), force, torque, vibration, shock, pressure (including low and high pressure), flow (variable head, variable area, electromagnetic, ultrasonic, turbine flowmeters), temperature (thermocouple, bolometer, 2, 3, 4 wire RTD, thermistor, pyrometer and semiconductor sensor), liquid level, pH, conductivity and viscosity measurement.

Section 10: Communication and Optical Instrumentation

  • Amplitude and frequency modulation and demodulation, pulse code modulation, frequency and time division multiplexing; amplitude, phase, frequency, quadrature amplitude, pulse shift keying for digital modulation and demodulation; functional architectures of transmitters and receivers; instrument and sensor networks, 4–20 mA two-wire transmitter. Optical sources and detectors: LED, laser, photo-diode, light dependent resistor, square law detectors and their characteristics; interferometer: applications in metrology; basics of fiber optic sensing. Nearinfrared (NIR) sensing, Ultraviolet-Visible (UV-VIS) spectrophotometers, mass spectrometer.

Branch/Discipline: Mechanical Engineering

Section 1: Engineering Mathematics

  • Linear Algebra: Matrix algebra, systems of linear equations, eigen values and eigen vectors.
  • Calculus: Functions of single variable, limit, continuity and differentiability, mean value theorems, indeterminate forms; evaluation of definite and improper integrals; double and triple integrals; partial
    derivatives, total derivative, Taylor series (in one and two variables), maxima and minima, Fourier series; gradient, divergence and curl, vector identities, directional derivatives, line, surface and volume integrals, applications of Gauss, Stokes and Green’s theorems.
  • Differential equations: First order equations (linear and nonlinear); higher order linear differential equations with constant coefficients; Euler-Cauchy equation; initial and boundary value problems; Laplace transforms; solutions of heat, wave and Laplace's equations.
  • Complex variables: Analytic functions; Cauchy-Riemann equations; Cauchy’s integral theorem and contour integral formula; Taylor and Laurent series.
  • Probability and Statistics: Definitions of probability, sampling theorems, conditional probability; mean, median, mode and standard deviation; random variables, binomial, Poisson and normal distributions.
  • Numerical Methods: Numerical solutions of linear and non-linear algebraic equations; integration by trapezoidal and Simpson’s rules; single and multi-step methods for ordinary differential equations.

Section 2: Applied Mechanics and Design

  • Engineering Mechanics: Free-body diagrams and equilibrium; friction and its applications including rolling resistance, belt-pulley, brakes, clutches, screw jack, wedge, vehicles, etc.; plane trusses and frames; virtual work; kinematics and dynamics of rigid bodies in plane motion; impulse and momentum (linear and angular) and energy formulations.
  • Mechanics of Materials: Stress and strain, elastic constants and their relationships; stress and strain components transformations in 2D; Mohr’s circle for plane stress and plane strain; thin-walled pressure
    vessels; shear force and bending moment diagrams; bending and shear stresses; concept of shear centre; deflection of beams; torsion of circular shafts; Euler’s theory of columns; energy methods; thermal stresses; strain gauges and rosettes; Mechanical properties of materials, toughness, hardness, impact strength.
  • Theory of Machines: Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of linkages; cams; gears and gear trains; flywheels and governors; balancing of reciprocating and rotating masses; gyroscope.
  • Vibrations: Free and forced vibration of linear systems with single and two degrees of freedom, damping estimation and effects; vibration isolation, transmissibility ratio; resonance; critical speeds of shafts; Control system, PID controller, transfer function.
  • Machine Design:Design for static and dynamic loading; failure theories; fatigue strength and the S-N diagram; principles and design of machine elements such as bolted, riveted and welded joints; shafts, gears, belt drives, rolling and sliding contact bearings, brakes and clutches, springs.

Section 3: Fluid Mechanics and Thermal Sciences

  • Fluid Mechanics: Fluid properties; fluid statics, forces on submerged bodies, stability of floating bodies; control-volume analysis of mass, momentum and energy; fluid acceleration; differential equations of
    continuity and momentum; concept of velocity potential; Bernoulli’s equation; dimensional analysis; viscous flow of incompressible fluids, boundary layer, elementary turbulent flow, flow through pipes, head losses in pipes, bends and fittings; One dimensional high speed compressible fluid flow; flow through converging and converging-diverging nozzles.
  • Heat-Transfer: Modes of heat transfer; one dimensional heat conduction, resistance concept and electrical analogy, heat transfer through fins; unsteady heat conduction, lumped parameter system, thermal boundary layer, dimensionless parameters in free and forced convective heat transfer, heat transfer correlations for flow over flat plates and through pipes; boiling and condensation; effect of turbulence; heat exchanger performance, LMTD and NTU methods; radiative heat transfer, Stefan- Boltzmann law, Wien's displacement law, black and grey surfaces, view factors, radiation network analysis.
  • Thermodynamics: Thermodynamic systems and processes; properties of pure substances, behaviour of ideal and real gases; zeroth, first and second laws of thermodynamics, calculation of work, heat, energy changes and entropy changes in various processes; application of first and second laws for analysis of closed and open systems; thermodynamic property charts and tables, availability and irreversibility; thermodynamic relations.
  • Applications: Power Engineering: vapour and gas power cycles, concepts of regeneration and reheat; I.C. Engines: Air-standard Otto, Diesel and dual cycles; Basics of Combustion: Air- Fuel Ratio, Equivalence Ratio; Refrigeration and air-conditioning: Vapour and gas refrigeration and heat pump cycles, properties of moist air, psychrometric chart, basic psychrometric processes; Turbomachinery: Impulse and reaction principles, velocity diagrams, Pelton-wheel, Francis and Kaplan turbines, steam and gas turbines, Air and gas compressors, pumps and pump characteristics.

Section 4: Materials, Manufacturing and Industrial Engineering

  • Engineering Materials: Crystal structure of common metals, phase diagrams, heat treatment; Properties and applications of engineering materials - metals and alloys, polymers, composites and ceramics; Engineering and true stress-strain diagrams.
  • Casting, Forming and Joining Processes: Different types of casting processes; Patterns, moulds and core; Solidification and cooling, riser and gating design, casting defects; Plastic deformation and yield criteria; Hot working and cold working; Principles of bulk forming and sheet forming processes and estimation of load in these processes; Fundamentals of powder metallurgy and its applications; Principles of welding, brazing, soldering; Solid-state welding processes, adhesive bonding; Non-destructive testing methods.
  • Machining and Machine Tool Operations: Basic machining operations and machine tools; Single-point and multipoint cutting tools; Geometry of single-point turning tools - ASA and ORS systems; Mechanics of machining; Cutting tool materials, tool life and tool wear; Economics of machining; Abrasive machining processes; Principles and applications of non-traditional machining processes; Principles of work holding, jigs and fixtures.
  • Metrology and Inspection: Limits, fits and tolerances; Linear and angular measurements; Comparators; Interferometry; Form and finish measurement; Alignment and testing methods; Tolerance analysis in
    manufacturing and assembly; Principle of coordinate- measuring machine (CMM).
  • Computer Integrated Manufacturing: Basic concepts of CAD/CAM and their integration tools; NC/CNC machines and CNC programming; Pneumatic, electro-pneumatic, and hydraulic actuators for
    automation; Programmable logic controllers.
  • Production Planning and Control: Work study, Productivity, Forecasting models, Aggregate production planning, Scheduling, Materials requirement planning, Six sigma, Lean manufacturing, Inventory Control – deterministic models, safety stock, inventory control systems, Quality and reliability concepts for product lifecycle analysis.
  • Metrology and Inspection: Limits, fits and tolerances; Linear and angular measurements; Comparators; Interferometry; Form and finish measurement; Alignment and testing methods; Tolerance analysis in
    manufacturing and assembly; Principle of coordinate- measuring machine (CMM).
  • Operations Research: Linear programming, Simplex method, Transportation, Assignment, Network flow models, Simple queuing models, PERT and CPM.

Branch/Discipline: Production & Industrial Engineering

Section 1: Engineering Mathematics

  • Linear Algebra: Matrix algebra; Systems of linear equations; Eigenvalues and eigenvectors.
  • Calculus: Functions of single variable; Limit, continuity and differentiability; Mean value theorems, Evaluation of definite integrals; Partial derivative; Total derivative; Maxima and minima; Gradient, divergence and curl; Vector identities; Directional derivatives; Line, Surface and Volume integrals; Stokes, Gauss and Green’s theorems; Taylor series.
  • Differential Equations: First order equations: linear and nonlinear; Higher order linear differential equations with constant coefficients; Cauchy’s and Euler’s equations; Initial and boundary value problems; Laplace transform
  • Probability and Statistics: Definitions of probability and sampling theorems; Conditional probability; Mean, median, mode and standard deviation; Linear regression, Random variables, Poisson, normal, binomial and exponential distributions.
  • Numerical Methods: Numerical solutions of linear and nonlinear algebraic equations; Integration by trapezoidal and Simpson’s rules; Single and multi-step methods for differential equations.

Section 2: General Engineering

  • Engineering Materials: Structure, physical and mechanical properties, and applications of common engineering materials (metals and alloys, semiconductors, ceramics, polymers, and composites – metal, polymer and ceramic based); Iron-carbon equilibrium phase diagram; Heat treatment of metals and alloys and its influence on mechanical properties; Stress-strain behavior of metals and alloys.
  • Applied Mechanics: Engineering mechanics – equivalent force systems, free body concepts, equations of equilibrium; Strength of materials – stress, strain and their relationship; Failure theories; Mohr’s circle (stress); Deflection of beams, bending and shear stresses; Thick and thin cylinders; Torsion.
  • Theory of Machines and Design: Analysis of planar mechanisms, cams and followers; Governors and fly wheels; Design of bolted, riveted and welded joints; Interference/shrink fit joints; Friction and lubrication; Design of shafts, keys, couplings, spur gears, belt drives, brakes and clutches.
  • Thermal and Fluids Engineering: Fluid mechanics – fluid statics, Bernoulli’s equation, flow through pipes, laminar and turbulent flows, equations of continuity and momentum, capillary action; Dimensional analysis; Thermodynamics – zeroth, first and second laws of thermodynamics, thermodynamic systems and processes, calculation of work and heat for systems and control volumes; Air standard cycles; Heat transfer – basic applications of conduction, convection and radiation.

Section 3: Manufacturing Processes I

  • Casting: Types of casting processes and applications; Sand casting: patterns – types, materials and allowances; molds and cores–materials, making, and testing; design of gating system and riser; analysis of solidification and microstructure development; Other casting techniques: Pressure die casting, centrifugal casting, investment casting, casting defects and their inspection by non-destructive testing.
  • Metal Forming: Stress-strain relations in elastic and plastic deformation; von Mises and Tresca yield criteria, concept of flow stress; Hot, warm and cold working; Bulk forming processes – forging, rolling, extrusion and wire drawing; Sheet metal working processes – blanking, punching, bending and deep drawing; Ideal work and slab analysis; Defects in metal working and their causes.
  • Joining of Materials: Classification of joining processes; Principles of fusion welding processes using different heat sources (flame, arc, resistance, laser, and electron beam), heat transfer and associated losses; Arc welding processes - SMAW, GMAW, GTAW, plasma arc, submerged arc welding processes; Principles of solid state welding processes - friction welding, friction stir welding, ultrasonic welding; Welding defects - causes and inspection; Principles of adhesive joining, brazing and soldering processes.
  • Powder Processing: Production of metal/ceramic powders, compaction and sintering of metals and ceramic powders.
  • Polymers and Composites: Polymer processing – injection, compression and blow molding, extrusion,calendaring and thermoforming; Molding of composites.

Section 4: Manufacturing Processes II

  • Machining: Orthogonal and oblique machining, single point cutting tool and tool signature, chip formation, cutting forces, merchant’s analysis, specific cutting energy and power; Machining parameters and material removal rate; Tool materials, tool wear and tool life; Thermal aspects of machining, cutting fluids, machinability; Economics of machining; Machining processes - turning, taper turning, thread cutting, drilling, boring, milling, gear cutting, thread production; Finishing processes – grinding, honing, lapping and super-finishing.
  • Machine Tools: Lathe, milling, drilling and shaping machines – construction and kinematics; Jigs and fixtures – principles, applications, and design.
  • Advanced Manufacturing: Principles and applications of USM, AJM, WJM, AWJM, EDM, LBM, EBM, PAM, CHM, ECM; Effect of process parameters on material removal rate, surface roughness and power consumption; Additive manufacturing techniques: Fundamentals, stereolithography, fused filament fabrication, selective laser sintering, selective laser melting, directed energy deposition.
  • Computer Integrated Manufacturing: Basic concepts of CAD and CAM, CNC; Automation in manufacturing; Industrial robots – configurations, drives and controls; Cellular manufacturing and FMS - group technology; Introduction to Internet of Things and digital twins.

Section 5: Quality and Reliability

  • Metrology and Inspection: Accuracy and precision; Types of errors; Limits, fits and tolerances; Gauge design, Interchangeability, selective assembly; Linear, angular, and form measurements (straightness, flatness, roundness, runout and cylindricity) by mechanical and optical methods; Inspection of screw threads and gears; Surface roughness measurement by contact and non-contact methods.
  • Quality Management: Quality – concepts and cost; Statistical quality control – process capability analysis, control charts for variables and attributes and acceptance sampling; Six sigma; Total quality management, Just-in-Time inventory management; Quality assurance and certification - ISO 9001:2015, ISO 14001:2015; Integration of sustainable manufacturing with quality management.
  • Reliability and Maintenance: Reliability, availability and maintainability; Distribution of failure and repair times; Determination of MTBF and MTTR, reliability models; Determination of system reliability; Preventive and predictive maintenance and replacement, total productive maintenance.

Section 6: Industrial Engineering

  • Product Design and Development: Principles of product design, tolerance design; Quality and cost considerations; Product life cycle; Standardization, simplification, diversification; Value engineering and analysis; Concurrent engineering; Design for “X”.
  • Work System Design: Taylor’s scientific management, Gilbreths’s contributions; Productivity – concepts and measurements; Method study, Micro-motion study, Principles of motion economy; Work measurement – time study, Work sampling, Standard data, PMTS; Ergonomics; Job evaluation and merit rating.
  • Facility Design: Facility location factors and evaluation of alternate locations; Types of plant layout and their evaluation; Assembly line balancing; Material handling systems.

Section 7: Operations research and Operations management

  • Operation Research: Linear programming – problem formulation, simplex method, duality and sensitivity analysis; Transportation and assignment models; Integer programming; Markovian queuing models; Introduction to discrete event simulation.
  • Engineering Economy and Costing: Elementary cost accounting and methods of depreciation; Break-even analysis; Activity based costing.
  • Production control: Forecasting techniques – causal and time series models, moving average, exponential smoothing, trend and seasonality; Aggregate production planning; Master production scheduling; MRP, MRP-II and ERP; Routing, scheduling and priority dispatching; Push and pull production systems, concepts of lean and agile manufacturing systems; Logistics, distribution, and supply chain management; Inventory – functions, costs, classifications, deterministic inventory models, quantity discount; Perpetual and periodic inventory control systems.
  • Project management: CPM, PERT and Gantt chart. Time-cost tradeoff.

GATE 2027 Exam Schedule

Activity Important Dates (Tentative)
Opening Date of GATE Online Application Processing System (GOAPS)

14th August, 2026 (Friday)

Closing Date of REGULAR online registration/application process (Without Late Fee)

21st September, 2026 (Monday)

Closing Date of EXTENDED online registration/application process (With Late Fee)

30th September, 2026

Opening Date of GATE 2027 Application rectification 14th October 2026
Closing Date of GATE 2027 Application rectification 21st October 2026
City allotment notification 4th January 2027

GATE 2027 Exam Dates

6th February, 2027

7th February, 2027

13th February, 2027

14th February, 2027

20th February, 2027

21st February, 2027

GATE 2027 Result Announcement Date

19th March, 2027

*All dates are liable to change.

Day, Date Time (IST) Test Papers
Saturday, February 06, 2027

09:30 AM - 12:30 PM (Forenoon Session -FN)

AG, ES, GG, IN, MA, MN, TF, XE, XL

2:30 pm to 5:30 pm (Afternoon Session – AN)

AE, BT, CH, CY, GE, PH, XH

Sunday, February 07, 2027

9:30 am to 12:30 pm (Forenoon Session – FN)

CS-1, ST

2:30 pm to 5:30 pm (Afternoon Session – AN)

CS-2, EY, NM, PE
Saturday, February 13, 2027

9:30 am to 12:30 pm (Forenoon Session – FN)

CE-1, EE, PI

2:30 pm to 5:30 pm (Afternoon Session – AN)

BM, CE-2, ME, MT

Sunday, February 14, 2027

9:30 am to 12:30 pm (Forenoon Session – FN)

EC

2:30 pm to 5:30 pm (Afternoon Session – AN)

AR, DA
Saturday, February 20, 2027 9:30 am to 12:30 pm (Forenoon Session – FN)  
2:30 pm to 5:30 pm (Afternoon Session – AN)  
Saturday, February 21, 2027 9:30 am to 12:30 pm (Forenoon Session – FN)  
2:30 pm to 5:30 pm (Afternoon Session – AN)  

Subject Specialization Priority

Focus on the subjects in the GATE syllabus by evaluating their exam weightage, your strengths, and their importance to your chosen field. Strategic subject prioritization leads to smarter preparation and a higher score. Here, we have mentioned the subjects in detail. You can check out:

Electronics & Telecommunication Engineering

  • VLSI Design Tool Technology
  • Integrated Electronics & Circuits
  • Micro Electronics
  • Microwave Engineering
  • Communication Engg
  • Telecommunication Technology & Management
  • Optoelectronics & Optical Communication
  • Nanotechnology
  • Digital Signal Processing
  • Control & Automation

Electrical Engineering

  • Power Electronics
  • Machines & Drives
  • Power Systems
  • Control & Automation
  • Digital Signal Processing
  • Instrumentation Technology

Mechanical Engineering

  • Design of Mechanical Equipment or Machine Design
  • Thermal Engineering
  • Manufacturing Science & Engineering
  • Production Engineering
  • Industrial Engineering
  • Material Science & management

Civil Engineering

  • Structural Engineering
  • Geotechnical Engineering
  • Construction Engineering & Management
  • Transportation Engineering
  • Environmental Engineering
  • Earthquake Engineering
  • Water Resources Engineering
  • Rock Engineering & Underground Structure
  • Computer Science and Engineering & Information Technology

Computer Science

  • Information Technology
  • Information Security
  • Software Engineering
  • Distributed Computing
  • Image Processing
  • Computer Systems and Hardware
  • Database and Information Systems
  • Programming languages
  • Computer Networks and Distributed Systems
  • Artificial Intelligence
  • Advanced Computing

GATE Exam 2027 Admit card

The admit card is an important document for GATE aspirants. This is an entry ticket to the examination hall, thus enabling aspirants to attempt the GATE exam. All the candidates whose applications have been successfully accepted are issued admit cards by the exam-conducting authority. The admit card contains all the essential details of the candidates required for verification, such as the candidate’s name and photo, registration number, exam date, exam shift and time, and exam centre address, along with some important instructions.

How to download?

Let us look at the step by step process to download the GATE exam admit card .

  • Visit the official website of GATE 2027 https://gate2027.iitm.ac.in and click on the application portal. Alternatively, candidates can also visit the link https://goaps.iitg.ac.in/login and land directly on the application portal.
  • Enter the login credentials, such as your enrollment number and password.
  • Evaluate the arithmetic expression and enter your answer.
  • Click on login.
  • After login, your application portal will open; locate the admit card section and download it.
  • Verify all the details mentioned on the admit card. Contact the GATE authorities in case of any discrepancy.
  • If there is no mistake, download and print the admit card.

We wish you all the very best to every GATE aspirant!

Note: IIT Madras has not yet released the GATE 2027 admit card. We’ll update you once the admit card is released.

GATE 2027 Admit Card

Testimonials

Access the right resources, such as standard textbooks, previous years’ papers, online test series, and video lectures at MADE EASY. Quality study materials are essential for building concepts and mastering the GATE syllabus efficiently.

GATE 2027 Resources

Access the right resources, such as standard textbooks, previous years’ papers, online test series, and video lectures at MADE EASY. Quality study materials are essential for building concepts and mastering the GATE syllabus efficiently.

 

List of IITs

Here is a list of the Indian Institutes of Technology (IITs) across the country. These prestigious institutions offer M.Tech and research programs through GATE scores, and each IIT is known for its academic excellence and specialized fields.

S.No Name of IIT State Year of Establishment Website
1 IIT Kharagpur West Bengal 1951 http://www.iitkgp.ac.in/
2 IIT Bombay Maharashtra 1958 https://www.iitb.ac.in/
3 IIT Madras Tamil Nadu 1959 https://www.iitm.ac.in/
4 IIT Kanpur Uttar Pradesh 1959 https://www.iitk.ac.in/
5 IIT Delhi Delhi 1961 https://home.iitd.ac.in/
6 IIT Guwahati Assam 1994 https://www.iitg.ac.in/
7 IIT Roorkee Uttarakhand 2001 https://www.iitr.ac.in/
8 IIT Ropar Punjab 2008 https://www.iitrpr.ac.in/
9 IIT Bhubaneswar Odisha 2008 https://www.iitbbs.ac.in/
10 IIT Gandhinagar Gujarat 2008 https://iitgn.ac.in/
11 IIT Hyderabad Telangana 2008 https://iith.ac.in/
12 IIT Jodhpur Rajasthan 2008 https://iitj.ac.in/
13 IIT Patna Bihar 2008 https://www.iitp.ac.in/
14 IIT Indore Madhya Pradesh 2009 https://www.iiti.ac.in/
15 IIT Mandi Himachal Pradesh 2009 https://www.iitmandi.ac.in/
16 IIT (BHU) Varanasi Uttar Pradesh 2012 https://iitbhu.ac.in/
17 IIT Palakkad Kerala 2015 https://iitpkd.ac.in/
18 IIT Tirupati Andhra Pradesh 2015 https://www.iittp.ac.in/
19 IIT Dhanbad Jharkhand 2016 https://www.iitism.ac.in
20 IIT Bhilai Chhattisgarh 2016 https://www.iitbhilai.ac.in/
21 IIT Dharwad Karnataka 2016 https://www.iitdh.ac.in/
22 IIT Jammu Jammu and Kashmir 2016 https://www.iitjammu.ac.in/
23 IIT Goa Goa 2016 https://iitgoa.ac.in/

List of NITs

Here, we have mentioned the prominent NITs across India. These institutes are well-known for their engineering and research programs and accept GATE scores for M.Tech admissions.

S.No Name of NIT State Year of Establishment Website
1 NIT Allahabad Uttar Pradesh 2002 http://www.mnnit.ac.in/
2 NIT Bhopal Madhya Pradesh 2002 http://www.manit.ac.in/
3 NIT Nagpur Maharashtra 2002 https://vnit.ac.in/
4 NIT Durgapur West Bengal 2002 https://nitdgp.ac.in/
5 NIT Hamirpur Himachal Pradesh 2002 https://nith.ac.in/
6 NIT Jaipur Rajasthan 2002 https://mnit.ac.in/
7 NIT Jalandhar Punjab 2002 https://www.nitj.ac.in/
8 NIT Jamshedpur Jharkhand 2002 https://www.nitjsr.ac.in/
9 NIT Kurukshetra Haryana 2002 http://www.nitkkr.ac.in/
10 NIT Calicut Kerala 2002 http://www.nitc.ac.in/
11 NIT Rourkela Odisha 2002 https://www.nitrkl.ac.in/
12 NIT Silchar Assam 2002 http://www.nits.ac.in/
13 NIT Karnataka Karnataka 2002 https://www.nitk.ac.in/
14 NIT Warangal Telangana 2002 https://www.nitw.ac.in/
15 NIT Surat Gujarat 2002 https://www.svnit.ac.in/
16 NIT Tiruchirappalli Tamil Nadu 2002 https://www.nitt.edu/
17 NIT Srinagar Jammu and Kashmir 2003 https://nitsri.ac.in/
18 NIT Patna Bihar 2004 https://www.nitp.ac.in/
19 NIT Raipur Chhattisgarh 2005 http://www.nitrr.ac.in/
20 NIT Agartala Tripura 2006 https://nita.ac.in/
21 NIT Arunachal Pradesh Arunachal Pradesh 2010 https://www.nitap.ac.in/
22 NIT Delhi Delhi 2010 https://nitdelhi.ac.in/
23 NIT Goa Goa 2010 https://www.nitgoa.ac.in/
24 NIT Manipur Manipur 2010 https://www.nitmanipur.ac.in/
25 NIT Meghalaya Meghalaya 2010 https://www.nitm.ac.in/
26 NIT Mizoram Mizoram 2010 https://www.nitmz.ac.in/
27 NIT Nagaland Nagaland 2010 https://www.nitnagaland.ac.in/
28 NIT Puducherry Puducherry 2010 http://nitpy.ac.in/
29 NIT Sikkim Sikkim 2010 https://nitsikkim.ac.in/
30 NIT Uttarakhand Uttarakhand 2010 https://nituk.ac.in/
31 NIT Andhra Pradesh Andhra Pradesh 2015 https://nitandhra.ac.in/main/

List of IIITs

IIITs are premier institutes focused on Information Technology and allied disciplines. Many IIITs offer M.Tech and research programs, with admissions through GATE scores. Here is a list of major IIITs in India:

S.No Name of IIITs State Year of Establishment Website
1 Atal Bihari Vajpayee Indian Institute of Information Technology and Management Madhya Pradesh 1997 http://iiitm.ac.in/index.php/en/
2 Indian Institute of Information Technology, Allahabad Uttar Pradesh 1999 https://www.iiita.ac.in/
3 Indian Institute of Information Technology, Design and Manufacturing, Jabalpur Madhya Pradesh 2005 https://www.iiitdmj.ac.in/
4 Indian Institute of Information Technology, Design and Manufacturing, Kancheepuram Tamil Nadu 2007 https://www.iiitdm.ac.in/
5 Indian Institute of Information Technology, Sri City Andhra Pradesh 2013 https://www.iiits.ac.in/
6 Indian Institute of Information Technology, Guwahati Assam 2013 https://www.iiitg.ac.in/
7 Indian Institute of Information Technology, Vadodara Gujarat 2013 https://iiitvadodara.ac.in/
8 Indian Institute of Information Technology, Kota Rajasthan 2013 https://iiitkota.ac.in/
9 Indian Institute of Information Technology, Tiruchirappalli Tamil Nadu 2013 http://www.iiitt.ac.in/
10 Indian Institute of Information Technology, Una Himachal Pradesh 2014 https://iiitu.ac.in/
11 Indian Institute of Information Technology, Sonepat Haryana 2014 http://iiitsonepat.ac.in/
12 Indian Institute of Information Technology, Kalyani West Bengal 2014 https://iiitkalyani.ac.in/
13 Indian Institute of Information Technology, Lucknow Uttar Pradesh 2015 https://iiitl.ac.in/
14 Indian Institute of Information Technology, Dharwad Karnataka 2015 https://iiitdwd.ac.in/
15 Indian Institute of Information Technology, Design and Manufacturing, Kurnool Andhra Pradesh 2015 https://iiitk.ac.in/
16 Indian Institute of Information Technology, Kottayam Kerala 2015 https://www.iiitkottayam.ac.in/#!/home
17 Indian Institute of Information Technology, Manipur Manipur 2015 http://www.iiitmanipur.ac.in/
18 Indian Institute of Information Technology, Nagpur Maharashtra 2016 https://iiitn.ac.in/
19 Indian Institute of Information Technology, Pune Maharashtra 2016 https://www.iiitp.ac.in/
20 Indian Institute of Information Technology, Ranchi Jharkhand 2016 http://www.iiitranchi.ac.in/
21 Indian Institute of Information Technology, Surat Gujarat 2017 http://www.iiitsurat.ac.in/
22 Indian Institute of Information Technology, Bhopal Madhya Pradesh 2017 https://www.iiitbhopal.ac.in/
23 Indian Institute of Information Technology, Bhagalpur Bihar 2017 https://www.iiitbh.ac.in/
24 Indian Institute of Information Technology, Agartala Tripura 2018 https://www.iiitagartala.ac.in/
25 Indian Institute of Information Technology, Raichur Karnataka 2019 https://iiitr.ac.in/

 

 

 

 

 

QUICK ENQUIRY

Submit your details if you wish to receive information from us