{"id":629,"date":"2024-07-03T09:48:34","date_gmt":"2024-07-03T09:48:34","guid":{"rendered":"https:\/\/study.madeeasy.in\/?p=629"},"modified":"2025-07-16T14:53:34","modified_gmt":"2025-07-16T09:23:34","slug":"traversing-methods","status":"publish","type":"post","link":"https:\/\/www.madeeasy.in\/study\/ce\/surveying\/traversing-methods","title":{"rendered":"TRAVERSING METHODS"},"content":{"rendered":"\r\n<p style=\"text-align: justify;\">Traversing methods are classified as the basis of the instrument used for measuring the angle at the traverse station. Thus according to the type of instrument used, traversing methods can be classified as:<\/p>\r\n<ul style=\"text-align: justify;\">\r\n<li><strong>Chain Traverse:<\/strong> In chain traverse, the directions of the traverse lines are fixed by taking adequate ties near the traverse stations. Chain traverse is not a precise method of traversing.<\/li>\r\n<li><strong>Compass Traverse:<\/strong> Here in this method of traversing, the angles are measured with the help of a magnetic compass. But magnetic compass itself has its own limitations and thus accuracy of compass traverse is also very limited.<\/li>\r\n<li><strong>Plane Table Traverse:<\/strong> It is a unique method of traversing in a way that traverse can be plotted directly in the field but it is not a very precise method.<\/li>\r\n<li><strong>Stadia Traverse:<\/strong> In stadia traverse, the length of the traverse lines, the angles between the traverse lines and the elevations of the traverse stations are determined with the help of an instrument called tacheometer. This method gives elevations of traverse stations also in addition to provide horizontal control.<\/li>\r\n<li><strong>Theodolite Traverse:<\/strong> In this method of traversing, the angles are measured with the help of a theodolite. It is the most precise method of traversing in order to have an accurate horizontal control.<\/li>\r\n<\/ul>\r\n<p style=\"text-align: justify;\"><strong>Closed Traverse<\/strong><\/p>\r\n<ul style=\"text-align: justify;\">\r\n<li>This type of traverse initiates from one traverse station terminates either at the same starting station or at some other traverse station whose location is already known.<\/li>\r\n<li>As shown in figure (a), the traverse starts from the station \u2018A\u2019 and close on the same station <em>to form a polygon. This is known as loop <\/em>traverse.<\/li>\r\n<li>In link traverse as shown in figure, the location of traverse stations <em>A <\/em>and <em>E <\/em>are known with respect to reference stations <em><em>A&#8217; <\/em><\/em>and <em>E&#8217;<\/em>\u00a0respectively.<\/li>\r\n<li>Any error in closed traverse can easily be detected and thus can easily be adjusted.<\/li>\r\n<\/ul>\r\n<p style=\"text-align: justify;\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-375 aligncenter\" src=\"http:\/\/study.madeeasy.in\/wp-content\/uploads\/2024\/07\/loop-traverse.jpg\" alt=\"Loop Traverse\" width=\"327\" height=\"197\" \/><\/p>\r\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_79_1 ez-toc-wrap-left counter-hierarchy ez-toc-counter ez-toc-light-blue ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\" style=\"cursor:inherit\">Table of Contents<\/p>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"Toggle Table of Content\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">Toggle<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #999;color:#999\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewBox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #999;color:#999\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewBox=\"0 0 24 24\" version=\"1.2\" baseProfile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1 ' ><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/www.madeeasy.in\/study\/ce\/surveying\/traversing-methods\/#Open-Traverse\" >Open Traverse<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/www.madeeasy.in\/study\/ce\/surveying\/traversing-methods\/#Whole-Circle-Bearing-System\" >Whole Circle Bearing System<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/www.madeeasy.in\/study\/ce\/surveying\/traversing-methods\/#Quadrantal-Bearing-System\" >Quadrantal Bearing System<\/a><\/li><\/ul><\/nav><\/div>\n<h3 style=\"text-align: justify;\"><span class=\"ez-toc-section\" id=\"Open-Traverse\"><\/span>Open Traverse<span class=\"ez-toc-section-end\"><\/span><\/h3>\r\n<ul style=\"text-align: justify;\">\r\n<li>An open traverse initiates from one station whose location is known but terminates at a station whose location is neither known nor established.<\/li>\r\n<li>Open traverse is generally used for aligning a railway line or a highway or canal etc. An open traverse cannot be properly checked and adjusted.<\/li>\r\n<\/ul>\r\n<h3 style=\"text-align: justify;\"><span class=\"ez-toc-section\" id=\"Whole-Circle-Bearing-System\"><\/span>Whole Circle Bearing System<span class=\"ez-toc-section-end\"><\/span><\/h3>\r\n<ul style=\"text-align: justify;\">\r\n<li>In this system, the bearing of the line is measured from the north in clockwise direction.<\/li>\r\n<li>Thus whole circle bearing (abbreviated as WCB) of a line is the horizontal angle which the line makes with the north end of the reference meridian.<\/li>\r\n<li>The WCB of a line can vary from 0\u00b0 to 360\u00b0.<\/li>\r\n<li>In the figure, the whole circle bearings of line OA, OB, OC and OD are 45\u00b0, 150\u00b0, 240\u00b0 and 330\u00b0 respectively.<\/li>\r\n<\/ul>\r\n<p style=\"text-align: justify;\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-376 aligncenter\" src=\"http:\/\/study.madeeasy.in\/wp-content\/uploads\/2024\/07\/wcb-system.jpg\" alt=\"WCB System\" width=\"257\" height=\"245\" \/><\/p>\r\n<h3 style=\"text-align: justify;\"><span class=\"ez-toc-section\" id=\"Quadrantal-Bearing-System\"><\/span>Quadrantal Bearing System<span class=\"ez-toc-section-end\"><\/span><\/h3>\r\n<ul style=\"text-align: justify;\">\r\n<li>The quadrantal bearing of a line (abbreviated as <em>QB<\/em>) is the acute angle which the line makes with the meridian.<\/li>\r\n<li>Quadrantal bearing is measured either from north end or south end as the case may be i.e. whichever is nearer to the line. The quadrantal bearing of a line can vary from 0\u00b0 to 90\u00b0.<\/li>\r\n<li>Letters <em>N<\/em>, <em>E<\/em>, <em>W <\/em>and <em>S <\/em>are used respectively for north, east, west and south.<\/li>\r\n<\/ul>\r\n<p style=\"text-align: justify;\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-377 aligncenter\" src=\"http:\/\/study.madeeasy.in\/wp-content\/uploads\/2024\/07\/quadrantal-bearing-system.jpg\" alt=\"Quadrantal bearing system\" width=\"226\" height=\"223\" \/><\/p>\r\n<p style=\"text-align: justify;\">While writing the quadrantal bearing, the following steps are followed:<\/p>\r\n<p style=\"text-align: justify;\"><strong>Step-1: <\/strong>First write either <em>N <\/em>or <em>S <\/em>if the line is nearer to the north or south, as the case may be.<\/p>\r\n<p style=\"text-align: justify;\"><strong>Step-2: <\/strong>Write the angle (usually in degrees) which the line makes with the north or south, as the case may be.<\/p>\r\n<p style=\"text-align: justify;\"><strong>Step-3: <\/strong>Write letter <em>E <\/em>if line is in either I or II quadrant or W if line is in either III or IV quadrant.<\/p>\r\n<p style=\"text-align: justify;\">The whole circle bearing can be converted to quadrantal bearing and vice-versa.<\/p>\r\n<table class=\"table table-striped table-bordered table-condensed\" style=\"margin: 0 auto; width: 99%;\">\r\n<tbody>\r\n<tr>\r\n<th colspan=\"4\" width=\"337\">Conversion table for WCB and QB<\/th>\r\n<\/tr>\r\n<tr>\r\n<th width=\"48\">Line<\/th>\r\n<th style=\"text-align: center;\" width=\"81\">Quadrant<\/th>\r\n<th style=\"text-align: center;\" width=\"120\">WCB<\/th>\r\n<th width=\"88\">QB<\/th>\r\n<\/tr>\r\n<tr>\r\n<td width=\"48\">\r\n<p style=\"text-align: center;\">OA<\/p>\r\n<p style=\"text-align: center;\">OB<\/p>\r\n<p style=\"text-align: center;\">OC<\/p>\r\n<\/td>\r\n<td style=\"text-align: center;\" width=\"81\">\r\n<p>I<\/p>\r\n<p>II<\/p>\r\n<p style=\"text-align: center;\">III<\/p>\r\n<\/td>\r\n<td style=\"text-align: center;\" width=\"120\">\r\n<p>0 = 0\u00b0 to 90\u00b0<\/p>\r\n<p style=\"text-align: center;\">0 = 90\u00b0 to 180\u00b0<\/p>\r\n<p style=\"text-align: center;\">0 = 180\u00b0 to 270\u00b0<\/p>\r\n<\/td>\r\n<td style=\"text-align: center;\" width=\"88\">\r\n<p style=\"text-align: center;\">NqE<\/p>\r\n<p style=\"text-align: center;\">S(180\u00b0 \u2013 q)E<\/p>\r\n<p style=\"text-align: center;\">S(0 \u2013 180\u00b0)W<\/p>\r\n<\/td>\r\n<\/tr>\r\n<tr>\r\n<td style=\"text-align: center;\" width=\"48\">OD<\/td>\r\n<td width=\"81\">\r\n<p style=\"text-align: center;\">IV<\/p>\r\n<\/td>\r\n<td width=\"120\">\r\n<p style=\"text-align: center;\">q = 270\u00b0 to 360\u00b0<\/p>\r\n<\/td>\r\n<td width=\"88\">\r\n<p style=\"text-align: center;\">N(360\u00b0 \u2013 0)W<\/p>\r\n<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n<p style=\"text-align: justify;\">\u00a0<\/p>\r\n\r\n\r\n\r\n<p style=\"text-align: center;\"><a class=\"btn btn-danger\" role=\"button\" href=\"https:\/\/study.madeeasy.in\/ce\/surveying\/limiting-length-of-the-offset\/\" target=\"_blank\" rel=\"noopener\">&lt;&lt; Previous<\/a> | <a class=\"btn btn-success\" role=\"button\" href=\"https:\/\/study.madeeasy.in\/ce\/surveying\/fore-bearing-and-back-bearing\/\" target=\"_blank\" rel=\"noopener\"> Next &gt;&gt;<\/a> <br \/><strong> Must Read: <\/strong> <a href=\"https:\/\/study.madeeasy.in\/subjects\/what-is-surveying\/\" target=\"_blank\" rel=\"noopener\"><strong>What is Surveying?<\/strong><\/a><\/p>\r\n<p>&nbsp;<\/p>\r\n","protected":false},"excerpt":{"rendered":"<p>Traversing methods are classified as the basis of the instrument used for measuring the angle at the traverse station. Thus<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[203,2],"tags":[210,211,212,213],"class_list":["post-629","post","type-post","status-publish","format-standard","hentry","category-surveying","category-ce","tag-open-traverse","tag-quadrantal-bearing-system","tag-wcb","tag-whole-circle-bearing-system"],"_links":{"self":[{"href":"https:\/\/www.madeeasy.in\/study\/wp-json\/wp\/v2\/posts\/629","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.madeeasy.in\/study\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.madeeasy.in\/study\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.madeeasy.in\/study\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.madeeasy.in\/study\/wp-json\/wp\/v2\/comments?post=629"}],"version-history":[{"count":0,"href":"https:\/\/www.madeeasy.in\/study\/wp-json\/wp\/v2\/posts\/629\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.madeeasy.in\/study\/wp-json\/wp\/v2\/media?parent=629"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.madeeasy.in\/study\/wp-json\/wp\/v2\/categories?post=629"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.madeeasy.in\/study\/wp-json\/wp\/v2\/tags?post=629"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}